VEHICLE SPECS

MAKE: CHRYSLER

MODEL: PT CRUISER

YEAR: 2002

TRANSMISSION: FIVE SPEED MANUAL

ENGINE: 2.4 LITER DOHC 16 VALVE SMPI I-4

TIRES: TOYO PROXES 245/35/20

WHEELS 20 INCH #44 JESSE JAMES

ELECTRONICS  STOCK PLUS EAI 5 SWITCH AIR SUSPENSION SYSTEM CONTROLLER

BODY  STEVE BIGELOW OF DAMONS MOTORCYCLE CREATIONS APPLIED A HONDURAN
MAHOGONY VENEER, WITH ASH STRIPES AND MAHOGONY MALTESE-CROSS INLAYS.

PAINT HOUSE OF KOLOR BLACK BASE COAT, ROOT BEER KANDY BASE COAT AND
PAGAN GOLD KANDY BASE COAT WERE BLENDED AND APPLIED.

GROUND CLEARANCE  6 INCHES

                                                     MONSTER SPECS

HYDRAULICS MORBARK HYDRAULIC PUMP IS VICKERS VANE STYLE WITH A 4  GALLON
RING. IT’S ENGINE-DRIVEN (LIVE HYDRAULICS) AT A SPEED THAT PUMPS 6.5
GPM.

MOVING PARTS MORBARK FEEDER MODEL #2070 XL TWISTER

CHHIPPER HOUSING LOWER CHIPPER HOUSING HAS 1/4-INCH SIDES WITH 3/8-INCH
REINFORCEMENTS FOR CHIPPER BEARINGS. SIDES ARE DRILLED AND TAPPED TO
ACCEPT FLANGE BEARINGS. HOUSING BOTTOM IS 1/4 INCH FROM ANVIL TO
DISCHARGE AND 1 INCH FROM ANVIL TO FRONT OF HOUSING. THE ANVIL BLOCK IS
4-INCH CHANNEL IRON. THE ANVIL BLOCK AND THE 1 INCH RECEIVING PLATE
BEFORE THE ANVIL ARE REINFORCED FOR STRENGTH. ANVIL IS MADE OF 1/2 INCH
x4 INCH X 10 3/4 INCH ABRASION RESISTANT STEEL WITH THREE 5/8 INCH
MOUNTING BOLTS. THE ANVIL HAS FOUR WEAR SIDES.

CHIPPER DRUM THE DRUM IS CONSTRUCTED OF 1/2 INCH THICK END PLATES WITH A
1/2 INCH DRUM SURFACE ROLLED TO A 20 INCH OUTSIDE DIAMETER. THERE IS ONE
POCKET PER DRUM, MAKING ONE CUT PER REVOLUTION. THE POCKET CARRIES ONE
KNIFE EXTENDING THE FULL WIDTH OF THE DRUM. THE CHIPPER SHAFT IS 2 7/16
INCHES IN DIAMETER; IT’S STRESS PROFF, GROUND AND POLISHED. THE FINISHED
SIZE OF THE DRUM WITHOUT THE SHAFT IS 20 INCHES IN DIAMETER BY 10 1/2
INCHES WIDE. THE DRUM WEIGHS APPROXIMATELY 250 POUNDS. ITS SPEED IS
APPROXIMATELY 2,150 RPM.

KNIFE HOLDER THE WELDED KNIFE HOLDER IS 1 3/4 INCH THICK BY 5 INCHES
WIDE BY 10 1/2 INCHES LONG. THE HOLDER IS CAPABLE OF ACCEPTING ONE 1/2
INCH x 5 INCH x10 1/2 INCH DOUBLE EDGE KNIFE. THE KNIFE IS ATTACHED TO
THE HOLDER USING GRADE 8 3/4 INCH NF HEX HEAD BOLTS, FOUR PER KNIFE.

BOTTOM FEED WHEEL ONE 9 INCH DIAMETER BY 15 1/2 INCH WIDE FEED WHEEL
WITH TEETH WELDED TO ITS OUTER EDGE PROVIDES ADDITIONAL FEEDING ACTION
TO THE DRUM. THE FEED WHEEL SHAFT IS 1 3/4 INCHES IN DIAMETER, DRIVEN BY
A CHAIN AND COUPLER.

SPECIAL WELDS A SUB FRAME WAS BUILT TO HOLD THE MORBARK CHIPPERS
ADDITIONAL WEIGHT

ADDITIONAL ACQUIRED OR MACHINED PARTS INCLUDES A FLAME THROWER KIT,

A WEST COAST CHOPPERS AIR COOLER, HAND FABRICATED STEEL CHIPPER FEED
BIN, AN EAI AIR SUSPENSION SYSTEM, WHICH IN TURN INCLUDES AN EAI 5
GALLON CHROME TANK, FIVE SWITCH  SWITCH BOX AND 150 PSI VIAR COMPRESSOR.

BODY MODIFICATIONS AN ADDITIONAL SUB FRAME WAS ADDED TO THE CARGO AREA OF THE PT CRUISER .

INCLUDED IN PURCHASE IS A DVD OF THE MONSTER GARAGE EPISODE, A DVD OWNERS MANUAL FOR THE WOOD CHIPPER, A SIGNED ORIGINAL DRAWING OF THE CRUISER, AND A MONSTER GARAGE T- SHIRT.

THE CAR MUST BE PICKED UP IN GRAND JUNCTION COLORADO WITHIN 10 DAYS
UNLESS OTHER ARRANGEMENTS ARE MADE.

IF YOU HAVE ANY QUESTIONS PLEASE EMAIL ME, THANKS KRISTI.
Visit My eBay Store: vinylpro